High frequency PCB item identification NFC electronic tag with a diameter of 15mm RFID intelligent speaker tag
- Model
- Diameter 15Mm PCB NFC tag
Item specifics
- category
- PCB NFC tag
- support
- DC-NFC tag manufacturer
- size
- Diameter 15Mm
- thickness
- 0.05-0.07mm
- standard
- 14443a
- chip
- FM11NT021
- frequency
- 13.56MHZ
- temperature resistance
- 200 degrees /2 hours, 260 degrees 10-30 seconds
- operating temperature
- Minus 30 to 85 degrees
- reading distance
- About 1-10mm
- Authentication
- ROSH ,REACH CE
Review
Description
15MM PCB NFC TAG Description
High Quality 15MM PCB NFC TAG
● Application industry:Item identification, consumables management, gaming and entertainment, smart speakers
●characteristic：
FM11NT021 chip,15mm small NFC, high-temperature resistant NFC
15MM PCB NFC TAG Specification
|
Features
|
Contactless transmission of data and supply energy
|
||
|
Operating frequency
|
13.56 MHz
|
||
|
Data transfer
|
106 kbit/s
|
||
|
Data integrity
|
16-bit CRC, Parity check
|
||
The total capacity of EEPROM is 180 bytes, divided into 45 pages with 4 bytes per pageThe EEPROM user area has a capacity of 144 bytes, divided into 36 pages with 4 bytes per pageThe first 16 pages can be locked on a single page (one page corresponds to one lock positioning), and storage intervals after 16 pages can be locked on two pages (two pages correspond to one lock positioning)Data retention time: greater than 10 yearsScratching frequency: greater than 1 million times | |||
Each chip has an independent 7 byte UID, which cannot be rewritten The CC area has OTP function and tear resistance to prevent malicious unlocking. The storage area has a read-only lock function It has a password protected storage area function that can be selected and enabled, and the maximum number of password attempts can be configured. | |||
15MM PCB NFC TAG Applications
15MM PCB NFC TAG FAQ
1. How can I get the 15Mm PCB NFC TAG Description Small price?
Please Send your inquiry Details or add our online tool then we can provide you with a quotation for the first time.
2. Can you offer free samples?
Yes, usually we can offer you free samples
A: For stock samples, we can send you free samples for your test, you pay for the shipping cost.
B: For customized samples, we will charge the reasonable production cost and try to refund you after order confirmed
3. What is your lead time?
Usually, our lead time is 1-7 days for samples and 7-20 days for mass production.
4. What's your payment method ?
Our payment method are T/T, Ali Trade Assurance for mass production order; Paypal.
5. How can I Choose the chip?
Check above chips lists or just email with us of the application, we will give the best suggestions.
